To put on a duvet cover, match the inner’s corners to the cover’s corners, turn or unroll the cover around it, then check the edges before closing it. Work on the bed so the surface supports most of the weight.
In this guide
- Check the fit before you start
- Method one: turn the cover inside out
- Method two: roll the layers together
- Finish with a four-corner check
- Choose the inner before the finishing touches
Our bedding guide helps you choose the layers first. Here, we focus on getting the cover on with less lifting and a clear way to check the result.
Check the fit before you start
Read the dimensions on both labels. A queen name on two items is less useful than knowing they measure the same number of centimetres. Use our duvet size guide if you are matching a new inner to a cover you already own.
Find the cover opening and identify the head and foot ends. Patterns, seams or labels can help you keep a rectangular inner the right way round. Open the fasteners fully and check for internal ties. Use ties only with matching attachment points on the inner; avoid piercing the shell or tying around a bundle of filling.
Clear enough space to lay the inner flat. If it has just come out of storage, check that it is dry and spread it out before fitting the cover. Remove any spare bedding from underneath so you can see which edges belong together.
Method one: turn the cover inside out
- Lay the duvet inner flat on the bed, with its head end away from you.
- Turn the empty cover inside out. Reach through its opening and find the two closed corners at the far end.
- With your hands inside those cover corners, grasp the matching two corners of the inner.
- Bring the cover over your hands and down around the inner. Keep hold of both matched corners while drawing the fabric over.
- Rest the bundle back on the bed as you work. Pull the cover towards the remaining two corners, taking one side at a time.
- Reach through the opening to place the inner’s foot corners into the cover’s foot corners.
- Spread the duvet flat and run your hands along both sides to check that no edge is folded back inside.
This method is useful when the opening gives your arms enough room. With a large inner, one person can keep the upper corners together while another draws the cover down. There is no need to hold the entire duvet above your head.
Method two: roll the layers together
Turn the cover inside out and lay it flat with its opening at the foot. Place the inner on top, aligning all four corners and the long edges. If the cover has ties and the inner has matching loops, secure those before rolling.
Start at the closed head end and roll the cover and inner together towards the opening. Make a loose, even roll rather than compressing the filling tightly. When you reach the opening, fold the mouth of the cover around each end of the roll so the right side begins to face out. Work the opening around the remaining roll, then unroll back towards the head of the bed.
As you unroll, the inner should remain inside the cover. Pause if one side pulls ahead of the other: realign the edges on the bed instead of tugging harder. A narrow opening or an unusually shaped cover may make the inside-out method easier.
Finish with a four-corner check
Feel for the inner at each corner, then smooth from the centre towards the edges. Close buttons, zip or other fasteners with the fabric clear of the mechanism. Lay the covered duvet on the bed and check that the overhang is balanced.
A small amount of spare cover fabric is different from a corner that has folded over. If the inner repeatedly moves after fitting, our duvet slipping guide helps you check the ongoing cause. For the rest of the bed, follow how to make a bed.
Choose the inner before the finishing touches
If you are replacing the inner, keep your cover measurements beside you while comparing our wool and alpaca options. The right fit makes both changing the cover and settling the bed more straightforward.
Questions about duvet covers
Which end should the opening go at?
Putting the opening at the foot of the bed keeps fasteners away from your face. Follow any orientation marks or design on your own cover.
Why are the corners empty after I put the cover on?
Check that each inner corner has reached the matching cover corner and that the dimensions suit each other. An oversized cover can leave extra fabric even when the inner is centred.